Breather Membranes

Breather membranes allow insulated structures to easily release excess moisture vapour into the atmosphere and keep the internal components of wall and roof structures dry, whilst performing the task of a secondary protection membrane and preventing penetration by external environmental impurities, such as dirt and rain. These types of membrane are installed on the cold / external side of the insulation, beneath the main outer building lining, roof-tiles or cladding.

Another way to look at the way these products operate is to understand that their key function is not just to allow a building to breath, despite their name, as a building would happily be very breathable without any membrane in place at all.

However, if no membrane was used, then externally generated impurities (wind-driven rain and dust) may penetrate the wall or roof internal structures causing damage and poor performance. The job of a breather membrane is to stop these impurities from adversely affecting the building, but in order to carry out this task without suffocating the building, they need to be breathable. If polythene was used, for example, as an external protection lining, then this would make a great barrier against adverse external environmental conditions, but naturally occurring moisture produced from within the building would quickly become trapped in the interstitial layers causing untold damage.

Breathable membranes for walls tend to be of a generally lower specification than those used within roofs due to the nature of the application. Normally a roof breather would also be suitable as a high specification wall breather, but a wall breather would almost certainly not be suitable for use in a roof.

Most Novia breather membranes, can be used in external air-leakage applications within insulated walls; Black+ Ultra, Black+ Supreme, Black+ Pro, Reflex and FR Breather are suitable for external air-leakage applications within roofs. Although Black+ Construction Wrap is UKCA approved for use in a roof application, we do not recommend this due to the size and weight of the roll.

Improved U values can be achieved by installing reflective breather membranes such as Novia MirrorWrap W1 & Novia Reflex. Please see individual product pages for additional information.

Novia FR Breather Membrane is fire rated to class B-s1,d0 and is suitable to use in both standard and high rise constructions in compliance with building regulations in the UK.

For information regarding to BS 5534 wind uplift testing, please see individual product pages for detailed information. This information includes the requirements for overlaps, batten gauges and zone suitability where relevant.  

Glued to Novia Reflex breather membrane, Aluthermo RoofReflex® insulation creates a fully airtight insulating breathable membrane, which can add up to 1.47 r value. More information can be found on the full product page.

Our breather membranes are available for specification via NBS Source and NBS Chorus software.